Section 44 of 104
42. Reference Building Configuration
Stable section ID: S05-CON-016-SECTION-44 · 15 content blocks
The Reference Building Configuration shall provide a complete Building-scale implementation through which the integrated System05 architecture can be demonstrated and evaluated.
The initial configuration should represent a small, low-rise, residential or equivalent structure with:
regular structural geometry;
repeated bays and Interfaces;
a limited Node and Cartridge family;
an inspectable primary load path;
basic enclosure and utility systems;
selected Smart Nodes and sensors;
a functioning Building BIOS;
a synchronized Digital Twin;
planned inspection, replacement, and expansion operations.
The Reference Building shall identify its structural grid, dimensions, loads, materials, environmental assumptions, Regional Profile, Component identities, Interface Versions, assembly sequence, verification requirements, and operational limitations.
Where practical, the configuration should demonstrate phased expansion so that a smaller initial Building can receive additional rooms, systems, or structural bays through predefined expansion Interfaces.
The Reference Building shall not be optimized solely for appearance or demonstration speed. It shall expose the practical difficulties of manufacturing, transportation, installation, tolerance control, inspection, operation, modification, and disassembly.
Changes to the Reference Building shall be versioned. Results obtained from one Version shall not be transferred to another without an evaluation of the affected assumptions.