Section 32 of 104
30. Minimum Building BIOS
Stable section ID: S05-CON-016-SECTION-32 · 22 content blocks
The Minimum Building BIOS shall provide the authoritative digital foundation required to identify, configure, verify, operate, and maintain the initial Building.
At minimum, the BIOS shall contain:
Building identity;
location and applicable Profiles;
approved configuration Version;
spatial and structural topology;
installed Node, Cartridge, Interface, and Component identities;
compatibility relationships;
commissioning and verification status;
safety constraints and operational limits;
Smart Module and sensor configuration;
maintenance and inspection requirements;
active Nonconformities, Deviations, and compensating measures;
access Roles and permissions;
lifecycle event history;
integrity and signature information.
The BIOS shall distinguish intended configuration, installed configuration, verified configuration, and current operational state.
A Product shall not be recorded as verified merely because its identifier is present.
BIOS changes shall require authorization appropriate to their consequence. Safety-critical configuration fields shall not be editable through ordinary user permissions.
The BIOS shall function during loss of cloud connectivity to the extent necessary for safe Building operation, identification, inspection, and recovery.
The Building BIOS shall remain independent of any single AI Model, marketplace, manufacturer portal, or temporary software service.
Historical Versions shall remain available for audit, incident investigation, restoration, and lifecycle interpretation.