Section 51 of 101
50. Engineering Profile Configuration
Stable section ID: S05-CON-006-SECTION-51 · 36 content blocks
Engineering Profile Configuration identifies the universal, regional, project-specific, environmental, operational, and experimental Profiles governing the building.
Each configured Profile shall include:
Profile ID;
title and purpose;
issuing authority;
version;
effective scope;
applicable entities or locations;
mandatory requirements;
recommended provisions;
optional provisions;
exceptions;
evidence requirements;
effective date;
superseded Profile reference.
Profiles may include:
System05 universal profiles;
Regional Engineering Profiles;
structural profiles;
electrical and utility profiles;
environmental profiles;
safety profiles;
robotic-installation profiles;
accessibility profiles;
cybersecurity profiles;
owner operational profiles;
experimental profiles.
The BIOS shall maintain a defined hierarchy of authority. Regulatory and safety requirements shall not be overridden by lower-authority convenience or owner-preference Profiles.
Where Profiles conflict, the BIOS shall:
identify the conflicting requirements;
determine whether an explicit precedence rule exists;
apply the valid higher-authority requirement;
block affected configuration where conflict remains unresolved;
record the resolution and authority.
Profile selection shall not be inferred solely from geographic location. Jurisdiction, building use, system type, project approval, and effective dates shall be verified.
Changes to Profile Configuration shall trigger impact analysis across all affected components, Interfaces, capabilities, and certifications.