Section 71 of 105
69. Electrical Power and Energy Interfaces
Stable section ID: S05-CON-014-SECTION-71 · 22 content blocks
Electrical Power and Energy Interfaces shall preserve safe, compatible, and controllable transfer of electrical energy.
Specifications shall define, as applicable:
- Voltage and frequency.
- Alternating or direct current.
- Current and power limits.
- Polarity and phase.
- Grounding and bonding.
- Insulation and separation.
- Overcurrent and fault protection.
- Arc and thermal protection.
- Touch-safe conditions.
- Connection and disconnection sequence.
- Isolation and lockout.
- Energy-storage state.
- Emergency shutdown.
- Environmental rating.
- Monitoring and communication requirements.
Incompatible voltage, polarity, phase, capacity, or protection classes shall be prevented by design or detected before energization.
Connection should occur in a de-energized or otherwise verified safe state unless the Interface is specifically designed and certified for energized connection.
Stored energy shall remain identifiable and controllable during maintenance, transport, emergency response, and disassembly.
Loss of data, AI, or remote communication shall not eliminate essential electrical protection.
Regional electrical requirements shall be satisfied without compromising System05 identity, modular replacement, and lifecycle traceability.