17
DraftS05-CON-014v0.1Source imported
Section 30 of 105
29. Scope and Applicability Conditions
Stable section ID: S05-CON-014-SECTION-30 · 29 content blocks
Each Rule shall define the conditions under which it applies.
Applicability may depend on:
- Asset type.
- Function.
- Configuration.
- Structural or safety criticality.
- Lifecycle stage.
- Interface version.
- Building type.
- Occupancy.
- Hazard exposure.
- Geographic region.
- Manufacturing method.
- Material class.
- Autonomy level.
- Conformance profile.
- Service condition.
- Temporary or emergency state.
- Applicability conditions shall be objective enough to support consistent determination.
The Rule Record shall identify:
- Included conditions.
- Excluded conditions.
- Conditional application.
- Required local determination.
- Authority responsible for applicability decisions.
- Evidence supporting a claim of non-applicability.
A Rule shall not be applied universally when its assumptions are absent, and it shall not be declared non-applicable merely because compliance is difficult or expensive.
Where applicability depends on engineering judgment, the responsible competency and decision record shall be defined.
Changes in configuration, use, exposure, ownership, or lifecycle state may trigger a new applicability determination.